Topic

Physical Features and Rivers of Punjab - Part 1 - Topic Guide and MCQs

Part of General Knowledge > Geography of Punjab - 25 questions, about 12.5 min, with an explanation after every answer.

25
Question count
about 12.5 min
Estimated time
Mixed
Difficulty
16 Nov 2026
Last updated
Quick answer

Physical Features and Rivers of Punjab - Part 1 is a topic inside General Knowledge (Geography of Punjab). It runs 25 untimed MCQs - roughly 12.5 min - and the review explains every answer once you submit.

Topic introduction

What Physical Features and Rivers of Punjab - Part 1 covers

The shape of the set before you start it.

Physical Features and Rivers of Punjab - Part 1 sits inside General Knowledge, under the Geography of Punjab lane, and the portal keeps it as one self-contained set: 25 questions, four options each, no clock and a written explanation behind every answer.

Attempt it once to find the gaps, read why each distractor is wrong, then retake the same set a few days later. The questions you miss twice are the ones worth writing down.

Curated by Gurpreet Singh · Punjab Police SI, Rank 2 (713/800) · Founder, House of Aspirants · Read his story →

Question bank

Physical Features and Rivers of Punjab - Part 1: all 25 questions

Read the question, pick an option, then open the answer.

  1. What is the average altitude of Punjab above sea level?

    1. 400–700 m
    2. 180–300 m
    3. 300–400 m
    4. Below 100 m
    Show answer

    Answer: (B) 180–300 m

    Explanation: Punjab lies mostly 180–300 m above sea level. 400–700 m is the height of the Shiwalik Hills and 300–400 m is the Kandi belt.

  2. The height of the Shiwalik Hills in Punjab is:

    1. 180–300 m
    2. 300–400 m
    3. 400–700 m
    4. Below 180 m
    Show answer

    Answer: (C) 400–700 m

    Explanation: The Shiwalik Hills rise to 400–700 m and are the highest landform of Punjab. The Kandi is 300–400 m and the plains 180–300 m.

  3. What is the width of the Shiwalik Hills belt in Punjab?

    1. 5–12 km
    2. 10–15 km
    3. 20–30 km
    4. 1–3 km
    Show answer

    Answer: (A) 5–12 km

    Explanation: The Shiwalik belt is 5–12 km wide. The 10–15 km width belongs to the Kandi area at the foot of the hills.

  4. The foothill plain at the base of the Shiwalik Hills is called:

    1. Bet
    2. Tibba
    3. Doab
    4. Kandi
    Show answer

    Answer: (D) Kandi

    Explanation: The Kandi is the foothill belt at the base of the Shiwalik Hills, 300–400 m high. Tibbas are sand dunes and a Doab is land between two rivers.

  5. What is the width of the Kandi belt?

    1. 5–12 km
    2. 10–15 km
    3. 25–40 km
    4. 50–60 km
    Show answer

    Answer: (B) 10–15 km

    Explanation: The Kandi belt is 10–15 km wide and lies at a height of 300–400 m. The 5–12 km width is that of the Shiwalik Hills.

  6. About what share of Punjab's area is covered by the alluvial plains?

    1. 30%
    2. 50%
    3. 70%
    4. 90%
    Show answer

    Answer: (C) 70%

    Explanation: The alluvial plains cover about 70% of the state and form its agricultural heartland.

  7. The Majha region lies between which two rivers?

    1. Ravi and Beas
    2. Beas and Sutlej
    3. Sutlej and Ghaggar
    4. Ravi and Chenab
    Show answer

    Answer: (A) Ravi and Beas

    Explanation: Majha lies between the Ravi and the Beas. Doaba is between the Beas and Sutlej, and the Malwa plains are between the Sutlej and Ghaggar.

  8. Majha is also known as:

    1. Bist–Jalandhar Doab
    2. Rachna Doab
    3. Sindh Sagar Doab
    4. Upper Bari Doab
    Show answer

    Answer: (D) Upper Bari Doab

    Explanation: Majha is the Upper Bari Doab, between the Ravi and Beas. The Bist–Jalandhar Doab is Doaba.

  9. The Bist–Jalandhar Doab is another name for:

    1. Majha
    2. Doaba
    3. Malwa
    4. Kandi
    Show answer

    Answer: (B) Doaba

    Explanation: Doaba, the land between the Beas and Sutlej, is called the Bist–Jalandhar Doab. Majha is the Upper Bari Doab.

  10. The Malwa plains lie between:

    1. Ravi and Beas
    2. Beas and Sutlej
    3. Sutlej and Ghaggar
    4. Ravi and Ghaggar
    Show answer

    Answer: (C) Sutlej and Ghaggar

    Explanation: The Malwa plains stretch between the Sutlej and the Ghaggar, south of the Sutlej.

  11. What are the sand dunes of south-west Punjab locally called?

    1. Tibbas
    2. Choes
    3. Bets
    4. Duns
    Show answer

    Answer: (A) Tibbas

    Explanation: The semi-arid sand dunes of south-west Punjab are locally called tibbas.

  12. The sand dune (tibba) area of Punjab lies at a height of:

    1. 400–700 m
    2. 300–400 m
    3. 180–300 m
    4. Below 180 m
    Show answer

    Answer: (D) Below 180 m

    Explanation: The sand dunes are the lowest landform of Punjab, below 180 m. The land slopes down from the Shiwalik Hills in the north-east to these dunes in the south-west.

  13. Which of these districts is NOT part of the Shiwalik Hills region of Punjab?

    1. Gurdaspur
    2. Hoshiarpur
    3. Bathinda
    4. Rupnagar
    Show answer

    Answer: (C) Bathinda

    Explanation: Gurdaspur, Pathankot, Hoshiarpur, Nawanshahr and Rupnagar have the Shiwalik Hills. Bathinda lies in the sand-dune area of the south-west.

  14. In which of these districts are sand dunes (tibbas) found?

    1. Pathankot
    2. Fazilka
    3. Gurdaspur
    4. Rupnagar
    Show answer

    Answer: (B) Fazilka

    Explanation: Tibbas are found in Fazilka, Ferozepur, Muktsar, Patiala, Sangrur, Bathinda and Mansa. Pathankot, Gurdaspur and Rupnagar are in the Shiwalik region.

  15. Going from north-east to south-west, which is the correct order of Punjab's landforms?

    1. Shiwalik Hills → Kandi → Alluvial Plains → Sand Dunes
    2. Kandi → Shiwalik Hills → Sand Dunes → Alluvial Plains
    3. Shiwalik Hills → Alluvial Plains → Kandi → Sand Dunes
    4. Alluvial Plains → Kandi → Shiwalik Hills → Sand Dunes
    Show answer

    Answer: (A) Shiwalik Hills → Kandi → Alluvial Plains → Sand Dunes

    Explanation: The land slopes down from the Shiwalik Hills (400–700 m) to the Kandi (300–400 m), then the alluvial plains (180–300 m) and finally the sand dunes (below 180 m).

  16. Which set of landforms and heights is correctly matched?

    1. Shiwalik-300–400 m; Kandi-400–700 m; Alluvial Plains-below 180 m; Sand Dunes-180–300 m
    2. Shiwalik-180–300 m; Kandi-below 180 m; Alluvial Plains-400–700 m; Sand Dunes-300–400 m
    3. Shiwalik-400–700 m; Kandi-180–300 m; Alluvial Plains-300–400 m; Sand Dunes-below 180 m
    4. Shiwalik-400–700 m; Kandi-300–400 m; Alluvial Plains-180–300 m; Sand Dunes-below 180 m
    Show answer

    Answer: (D) Shiwalik-400–700 m; Kandi-300–400 m; Alluvial Plains-180–300 m; Sand Dunes-below 180 m

    Explanation: Shiwalik Hills are 400–700 m, the Kandi 300–400 m, the alluvial plains 180–300 m and the sand dunes below 180 m. The other sets interchange the heights.

  17. Which landform of Punjab separates the Himalayas from the plains?

    1. Kandi
    2. Shiwalik Hills
    3. Sand dunes
    4. Malwa plains
    Show answer

    Answer: (B) Shiwalik Hills

    Explanation: The forested Shiwalik Hills separate the Himalayas from the plains. The Kandi lies at their base.

  18. The Kandi belt is found in which of these districts?

    1. Hoshiarpur
    2. Bathinda
    3. Mansa
    4. Fazilka
    Show answer

    Answer: (A) Hoshiarpur

    Explanation: The Kandi area covers the eastern parts of Pathankot, Hoshiarpur, Ropar, Gurdaspur and Nawanshahr. Bathinda, Mansa and Fazilka have sand dunes.

  19. Which landform is called the agricultural heartland of Punjab?

    1. Shiwalik Hills
    2. Kandi
    3. Alluvial plains
    4. Sand dunes
    Show answer

    Answer: (C) Alluvial plains

    Explanation: The alluvial plains, about 70% of the state's area, are the agricultural heartland of Punjab.

  20. The sand dune area of south-west Punjab is best described as:

    1. Forested hills
    2. A foothill plain
    3. A fertile river doab
    4. Semi-arid and desert-like
    Show answer

    Answer: (D) Semi-arid and desert-like

    Explanation: The tibba region of south-west Punjab is semi-arid and desert-like. Forested hills describe the Shiwaliks and the foothill plain is the Kandi.

  21. In which direction does the land of Punjab slope?

    1. From south-west to north-east
    2. From north-east to south-west
    3. From west to east
    4. From south to north
    Show answer

    Answer: (B) From north-east to south-west

    Explanation: The land slopes down from the Shiwalik Hills in the north-east to the sandy plains in the south-west.

  22. Which region of Punjab lies between the Beas and the Sutlej?

    1. Majha
    2. Malwa
    3. Doaba
    4. Kandi
    Show answer

    Answer: (C) Doaba

    Explanation: Doaba lies between the Beas and the Sutlej. Majha is between the Ravi and Beas, and Malwa between the Sutlej and Ghaggar.

  23. The alluvial plains of Punjab lie at a height of:

    1. 180–300 m
    2. 300–400 m
    3. 400–700 m
    4. Below 180 m
    Show answer

    Answer: (A) 180–300 m

    Explanation: The alluvial plains are 180–300 m high, the same as the state's average altitude.

  24. Which of these districts is NOT part of the sand dune (tibba) region?

    1. Mansa
    2. Sangrur
    3. Muktsar
    4. Hoshiarpur
    Show answer

    Answer: (D) Hoshiarpur

    Explanation: Tibbas are found in Fazilka, Ferozepur, Muktsar, Patiala, Sangrur, Bathinda and Mansa. Hoshiarpur lies in the Shiwalik and Kandi area.

  25. Which statement about the physical features of Punjab is correct?

    1. The Kandi is wider than 20 km and higher than the Shiwaliks
    2. The Shiwalik Hills are forested and 5–12 km wide
    3. The alluvial plains cover about 30% of the state
    4. The tibbas are found mainly in Gurdaspur and Pathankot
    Show answer

    Answer: (B) The Shiwalik Hills are forested and 5–12 km wide

    Explanation: The Shiwalik Hills are forested and 5–12 km wide. The Kandi is 10–15 km wide and lower (300–400 m), the plains cover about 70%, and tibbas are in the south-west.

Why it matters

Why Physical Features and Rivers of Punjab - Part 1 is worth the hours

Where the marks actually come from.

Physical Features and Rivers of Punjab - Part 1 is factual rather than analytical: you either recall it in seconds or you lose the mark to somebody who did. That makes it one of the cheapest sections to convert - a handful of short sittings usually settles the whole cluster.

Exam relevance

Exams where Physical Features and Rivers of Punjab - Part 1 matters

Derived from the subject and lane this topic belongs to.

Punjab Police Constable

The highest-volume recruitment on this list. Build your base with Punjab GK and current affairs, then drill reasoning until speed is automatic.

Punjab Police ASI

Assistant Sub-Inspector papers separate candidates on English and Punjabi accuracy as much as on general awareness. Practise language daily.

Punjab Police Sub-Inspector (SI)

The most competitive paper here. Polity, history and quant reasoning decide the rank - so take full timed mocks before the exam.

Punjab Police Jail Warder

A tighter syllabus: general awareness, Punjabi and basic reasoning. Perfect for a daily quiz habit - short sessions, high consistency.

Punjab Police

Punjab Police recruits across several posts - Constable, ASI, Sub-Inspector, Intelligence Assistant and Jail Warder each have their own page below. Start with your post, then drill the shared subjects as daily MCQs.

Punjab Police Driver

A driving post inside Punjab Police. Keep general awareness and reasoning moving with short daily sets here while you work on the driving side separately.

Patwari

Revenue work starts with Punjab geography, history and current affairs. Add quant for the sections that reward calculation speed.

Excise Inspector

General awareness and English carry this paper. Track Punjab policy news daily and revise it as MCQs, not as notes.

Forest Guard

Environment, geography and general science, with a physical test after the written paper. Keep science revision short and frequent.

Naib Tehsildar

Land records, Punjab history and polity, plus data interpretation. A strong polity base is the fastest score to build.

Clerk

Grammar, comprehension, typing and basic computer knowledge. Accuracy beats speed here - review every wrong answer.

Revenue Officer

A state services post. Punjab geography, history and current affairs are the blocks worth revising first as MCQs, and all three are available here.

Food Supply Inspector

Work around food supply and public distribution. General awareness and current affairs are the subjects to keep warm here with short daily sets.

Lab Attendant

A short, high-scoring paper: lab safety, general science and reasoning. Ten focused minutes a day is usually enough to cover it.

PSSSB

PSSSB recruitment. Whichever post you are writing, general awareness, Punjabi and reasoning are the shared subjects you can practise here as daily MCQs.

Punjab Police Head Constable

The communication and clerical tier of Punjab Police. Punjabi, English and general knowledge carry the paper, and computer awareness is worth real marks.

Punjab Civil Services

The state civil services paper. Polity, history and economy run deep here, and the descriptive sections reward candidates who have read a subject rather than skimmed it.

Railway Recruitment

A high-volume, high-speed paper. Arithmetic, reasoning and general awareness asked at a pace that punishes anyone still working out method during the attempt.

Union Public Service Commission

The civil services examination. The preliminary paper tests a broad syllabus on precision, and the preparation it needs is the preparation a state services candidate needs too.

Central Armed Police Forces

General ability, general knowledge, comprehension and essay for the central forces. The paper rewards candidates who read widely and write clearly under time.

Expected questions

Expected questions from Physical Features and Rivers of Punjab - Part 1

What an examiner usually reaches for in this cluster.

Expect one-line recall questions - definitions, stand-for expansions, identifiers and the ordering of things. Practise the wording as well as the concept: these papers test terminology, and the set above uses the same four-option shape they do.

Daily habit

Keep the Expected MCQs habit running

20 fresh mixed questions a day, plus the current-affairs sets examiners keep reusing.

Previous year questions

Previous Year Questions

How this topic behaves in real papers.

Past papers reuse clusters like this almost verbatim across years and posts. Run the same set until every distractor is familiar - previous-year style questions stop being recall and start being free marks.

Where the previous-year sets live

The portal's previous-year practice runs through the General Knowledge lane and the daily mixed quiz.

Keep going

Related topics

Neighbouring sets in this subject, then the rest of the portal.

Start practising

Take the Physical Features and Rivers of Punjab - Part 1 quiz

25 questions, about 12.5 min, instant scoring and a full review at the end.

Questions

Physical Features and Rivers of Punjab - Part 1 - common questions

Answered against the set as it is published today.

All questions →

How long is the Physical Features and Rivers of Punjab - Part 1 quiz?

Physical Features and Rivers of Punjab - Part 1 runs 25 untimed questions - about 12.5 min at a steady pace. The set clears at 40% and you can retake it as often as you like.

What kind of questions does Physical Features and Rivers of Punjab - Part 1 ask?

The set answers that: each question carries four options and a full explanation, so you learn the wording an examiner uses, not just the fact behind it.

Where else can I practise General Knowledge?

Open the quiz page above, or start from the General Knowledge subject page if you want to drill neighbouring lanes in the same sitting.

Do my scores save?

Scores, bookmarks and streaks need the optional Google sign-in. Opening the set and answering questions does not.